Tutorial

GPS Telemetry missing. You have telemetry working and discovered all sensors except GPS?

It’s easy to connect the Rush Tank to the F4 Flight Controller

  Most GPS’s only use 4 wires, and is straightforward. But the BN-880 is a bit different which can be confusing… Regular GPS Ground Power TX RX Deluxe GPS Ground Power TX RX SDA SCL But the BN-880 has 6… Continue Reading →

Intro I always used the default stick movements for arm / disarm instead of using a safely double action switch on my Taranis until it went wrong. It sounds strange but this was a good thing, this meant i was… Continue Reading →

Layout The pinout from Happymodels site. It’s so tiny, that it is almost impossible not to damage something by soldering unwanted parts together. But I really needed a good buzzer to find it back. Disamble the Mobula. After a crash… Continue Reading →

The board I have is this one: Betaflight has stopped supporting Naze32 FC as of 3.2.5. Cleanflight still supports Naze32 but has to remove some features. I decided to change the Naze to version 2.5.0 which bricked the FC. I decided to change the Naze to version… Continue Reading →

Someone who just started in this hobby asked my advice what to buy with a small budget. So when they finally received the goods they connected the lipo badly and released all the magic smoke out of the turnigy 9X.… Continue Reading →

Rudder is bad, so repair needed. During taxiing on the runway the tailwheel came loose… Let’s fix it! Removed the rudder and cut away the thin foamhinge. And removed the tailwheel. Now placing real hinges. The weak part is the… Continue Reading →

Because The Mobius battery is to small for recording hours of fun I decided to power it by USB input. But I don’t like the loose and fragile USB connector I decided to solder the wires direct internally. The wires… Continue Reading →